Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 521)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
IExerciserEngine 521
HotPlugTimeout Maximum time after which an expander
PHY retries an unsuccessful PHY reset
sequence, in millisecond format.
NOTE: Use only in SAS software.
AwaitALIGNTimeout Minimum time during SATA speed
negotiation that a PHY allows for an
ALIGN to receive after detecting
COMWAKE Completed, in OOBI format.
NOTE: Use only in SATA software.
COMSASDetectTimeout Minimum time a receiver allows to
detect COMSAS after transmitting
COMSAS.
Derived from: OOBI x 512 x 40
In microsecond format.
NOTE: Use only in SAS software.
CreditTimeout The SSP state machine timed out waiting
for an RRDY, or received a CREDIT
BLOCKED, and the transmitter is going to
transmit BREAK if credit is extended for 1
ms without receiving a frame or a DONE,
in microsecond format.
NOTE: Use only in SAS software.
DONETimeout After transmitting DONE, the
transmitting PHY initializes and starts a
1-ms DONE Timeout timer, in
microsecond format.
Note: Use only in SAS software.
ACKNAKTimeout The SSP state machine timed out waiting
for an ACK or NAK, and the transmitter is
going to transmit BREAK in 1 ms unless
DONE is received within 1 ms of
transmitting the DONE
(ACK/NAK TIMEOUT), in microsecond
format.
NOTE: Use only in SAS software.