Teledyne LeCroy Sierra SAS_SATA Protocol Analyzer STX API Reference Manual - Manual (Page 516)

Sierra SAS/SATA Protocol Suite, STX Software API Reference Manual
IExerciserEngine 516
GetCurrentProgramId
Int GetCurrentProgramId();
Inputs
Return Value
This return value is an integer ,made of 2 Words.
The High word is the Device Index and the Low word is the port index of the specified unit.
For Example if id is 0x12, This means the third port of Second attached unit.
Remark
Each port of each device in Initiator Emulator has own program. But be careful after specifying
the Port functionality of each device, Specified which port is initiator emulator, You can
program each port speratley in attention to Port configuration. To know which port is active to
program.