Teledyne LeCroy FireInspector - Users Manual - Manual (Page 59)

49
CATC F IRE I NSPECTOR 2.01 C HAPTER 5
User’s ManualCATC Trace Fil es
• Exclusion - Packets that DO NOT match (opposite to the intersection or
union): Selecting this finds all the packets that DO NOT match the
specified search criteria. It must be used in conjunction with either the
Union or Intersection option.
Step 5 Click OK.
5.1.4 Restore Factory Presets
You can reset the display options to the factory preset definitions by clicking the Restore
Factory Presets button on the bottom left of the Display Options dialog.
5.1.5 Saving Display Options
Once you have set display options using the Display Options dialog, you can save the
settings in a Display Options (.opt) file.
• Use the Save... button to access the Save As dialog and save the settings with a unique
name.
• Use the Save As Default button to save the settings and designate them to be automati-
cally loaded the next time the FireInspector software is started. Then, the settings will
automatically be applied when Trace files are opened, as long as no other display
options file is loaded in the meantime. The settings will be saved with the name
default.opt. If you save another set of display options as default, the file default.opt will
be overwritten.
5.1.6 Loading Display Options
Display options (.opt) files can be loaded and applied via the Display Options dialog.
Display options files are created by saving display settings.
To load a display options file:
Step 1
Open the Display Options dialog.
The General tab is displayed by default.
Step 2
From any tab, click the Load... button.
The Open dialog will appear.
Step 3
Navigate to the file that you want to use, then click Open.
The Open dialog will close and you'll be returned to the Display Options
dialog. The settings in the dialog will reflect the settings from the file you
chose.
Step 4
Click OK to apply the settings and close the Display Options dialog
or
Click Apply to apply the settings and leave the Display Options dialog open.