Teledyne LeCroy FireInspector - Users Manual - Manual (Page 52)

42
CATC F IRE I NSPECTOR 2.01 C HAPTER 5
User’s ManualCATC Trace Fil es
5.1 Display Options
The Display Options dialog box in FireInspector allows you to customize the way that Trace
view elements are displayed. The display of almost everything in a Trace can be defined,
from the fonts and colors to the number formats and types of packets and transactions to
show. These settings can then be saved to a display options (.opt) file. You can load saved
settings and apply them to any Trace file.
There are three ways to access the Display Options dialog:
• Click the Display Options icon on the toolbar.
• Select Setup > Display Options from the menu bar.
• Right-click anywhere in the display background of an active Trace file window and
select Display Options from the pop-up Trace View menu.
There are three tabs in the Display Options dialog:
• General: the General tab contains options for the zoom level, tooltips, wrapping, fonts,
and view levels.
• Color/Format/Hiding: the Color/Format/Hiding tab is used to customize the color set-
tings for individual fields, configure the way that numeric values are displayed, and to
show or hide fields.
• Level Hiding: the Level Hiding tab is used to set the visibility of specific packets.
5.1.1 General Display Options
Use the General tab of the Display Options dialog to define generic display settings.
To set general display options:
Step 1 Open the Display Options dialog.
The General tab (shown in Figure 5-2) is displayed by default.
Step 2 Configure the following elements to your liking:
• Zoom Level: Use this to set the magnification of the display. Can be set
from 10-200%, in increments of ten.
•
Enable Tips: Check this if you want tooltips to be shown when the mouse
passes over any header cell that contains a tooltip.
• Wrap: Check this if you want the packets to wrap to the width of the
display window.
• Right click cell context menu: Check this if you want the cell context
menus to pop up when you right-click on a cell. By default, the cell
context menus are accessed by left-clicking on a cell.
• Fonts: Use the Fields drop-down list to choose a font for the field text. Use
the Data drop-down list to choose a font for data.