Teledyne LeCroy FireInspector - Users Manual - Manual (Page 132)

122
CATC F IRE I NSPECTOR 2.01 C HAPTER 9
User’s Manual Reports
A new graph icon will appear in the list of graphs on the left side of the
dialog.
Step 3
Enter or edit the graph's name in the Title box.
Step 4 (For new graphs only) Select a graph type from the Type drop-down list.
Step 5
Choose an appearance setting from the Appearance drop-down list:
•
Bars (multiple colors): A bar graph with multiple colors uses the color
definitions from the Trace file, so that the colors in the graph correspond
to the colors in the Trace.
•
Bars (single color): A bar graph with a single color uses the color selected
in the Color chart.
• Line: A line graph uses the color selected in the Color chart.
Step 6
(For single color bar graphs and line graphs only) Select a color from the
drop-down color chart.
Note: Choosing Other... from the chart opens the Colors dialog. For details about
this dialog, please see “Color Tool/Colors Dialog” on page 44.
Step 7
(Optional) Configure filtering options in the Filter Out section of the dialog.
• Define Packets to Hide: Opens the Define Packets to Hide dialog.
• Hide Cycle Start Packets: When this option is checked, cycle start packets
will be omitted from the graph.
• Hide Isochronous Data Block Packets: When this option is checked,
isochronous data block packets will be omitted from the graph.
Step 8
Click OK to apply the changes and close the Graph Area Properties dialog
or
Click Apply to apply the changes and leave the Graph Area Properties dialog
open.
Define Packets to Hide
Use the Define Packets to Hide dialog to specify packets to exclude from a bus usage graph.
To define packets:
Step 1
Click Define Packets to Hide in the Graph Area Properties dialog.
The Define Packets to Hide dialog will open.
Step 2
Select an event type in the Hide list.
Note: The Hide list contains only those event types that are visible in the active
Trace file. Event types that are hidden or not contained in the Trace are grayed
out in the list.
The Event Groups list will display the event groups for the type of event you
have selected.
Step 3 Select an event group from the Event Groups list.