Teledyne LeCroy FireInspector - Users Manual - Manual (Page 26)

16
CATC F IRE I NSPECTOR 2.01 C HAPTER 2
User’s ManualGetting Started
The driver will install.
Step 8 Click Finish.
Step 9 Click the Driver File Details button to check the driver version and make
sure that the driver was successfully upgraded.
Step 10
Close the remaining open windows.
2.5.4 Updating the Driver on Windows XP
Step 1 Select Start > Control Panel from the desktop taskbar, then double-click
Performance and Maintenance.
Step 2
Double-click on System.
The System Properties window will open.
Step 3
Select the Hardware tab and click the Device Manager button.
The Device Manager window will open.
Step 4
Look in the CATC Analyzers directory and select CATC FireInspector IEEE
1394 Bus Analyzer.
or
Look in the Universal Serial Bus Controllers directory and select CATC
FireInspector IEEE 1394 Bus Analyzer.
Step 5
Select Action > Update Driver... from the Device Manager menu bar.
The Hardware Update Wizard will open.
Step 6
Choose “Install from a list or specific location.”
Step 7
Choose “Don’t search” then click Have Disk.
Step 8
Enter or browse to the location of the driver and click OK.
Step 9
Select CATC FireInspector IEEE 1394 Bus Analyzer from the list and click
Next.
The driver will install.
Step 10 Click Finish.
Step 11
Select Action > Properties from the Device Manager menu bar to check the
driver version and make sure that the driver was successfully upgraded.
Step 12
Close the remaining open windows.
2.6 License Keys
License Keys are necessary to enable software maintenance, traffic generation and Havi
decoding. If they are not enabled, a message will appear if an attempt is made to access these
features, stating that a License Key is necessary in order to use them. License Keys must be
obtained from CATC.