Teledyne LeCroy FireInspector - Users Manual - Manual (Page 57)

47
CATC F IRE I NSPECTOR 2.01 C HAPTER 5
User’s ManualCATC Trace Fil es
Step 5 Click OK to apply the changes and close the Display Options dialog
or
Click Apply to apply the changes and leave the Display Options dialog open.
5.1.3 Level Hiding Options
Use the Level Hiding tab in the Display Options dialog to prevent certain packets from being
displayed in Trace view. This tab is also used to unhide the hidden packets.
To hide or unhide packets:
Step 1 Open the Display Options dialog.
Step 2
Select the Level Hiding tab (shown in Figure 5-5).
Step 3 Select the packets that you want to hide or unhide:
• Check or uncheck the Hide Cycle Start Packets and/or Hide Isochronous
Data Block Packets checkboxes to suppress or show them in Trace
display.
• Select packets to hide or reveal by clicking the Define Packets to Hide
button.
The Define Packets to Hide dialog will open. See “Define Packets to Hide
Dialog” on page 48 for details about using this dialog.
Step 4
Click OK to apply the changes and close the Display Options dialog
or
Figure 5-5: Display Options dialog: level hiding options