Teledyne LeCroy FireInspector - Users Manual - Manual (Page 25)

15
CATC F IRE I NSPECTOR 2.01 C HAPTER 2
User’s ManualGetting Started
Step 2 Select the Device Manager tab.
Step 3
Look in the CATC Analyzers directory and select CATC FireInspector IEEE
1394 Bus Analyzer.
or
Look in the Universal Serial Bus Controllers directory and select CATC
FireInspector IEEE 1394 Bus Analyzer.
Step 4
Click the Properties button.
The Properties window will open.
Step 5
Select the Driver tab and click on the Update Driver button.
The Update Device Driver Wizard will open.
Step 6 Click Next.
Step 7 Choose “Search for a better driver than the one your device is using now.”
and click Next.
Step 8
Enter or browse to the location of the driver and click Next.
Step 9
Click Next to install the driver.
Note: If a message appears saying that Windows cannot locate the driver, click OK
to close the message box and then enter or browse to the location of the driver
to continue.
Step 10
Click Finish.
Step 11
Click the Driver File Details button to check the driver version and make
sure that the driver was successfully upgraded.
Step 12 Close the remaining open windows.
2.5.3 Updating the Driver on Windows Me
Step 1
Select Start > Settings > Control Panel from the desktop taskbar, then
double-click on System Properties in the Control Panel window.
The System Properties window will open.
Step 2
Select the Device Manager tab.
Step 3 Look in the CATC Analyzers directory and select CATC FireInspector IEEE
1394 Bus Analyzer.
or
Look in the Universal Serial Bus Controllers directory and select CATC
FireInspector IEEE 1394 Bus Analyzer.
Step 4
Click the Properties button.
The Properties window will open.
Step 5
Select the Driver tab and click on the Update Driver button.
The Update Device Driver Wizard will open.
Step 6
Choose “Automatically search for a better driver.” and click Next.
The Select Other Driver window will open.
Step 7
Select the newest driver and click OK.