Teledyne LeCroy FireInspector - Users Manual - Manual (Page 49)

39
CATC F IRE I NSPECTOR 2.01 C HAPTER 4
User’s ManualRecording 1394 Traffic
4.4 Enabling and Disabling Configuration ROM
When configuration ROM is disabled in FireInspector, the analyzer reports only a minimal
configuration ROM. In order to have FireInspector respond with a richer configuration
ROM, you must enable the default configuration ROM in FireInspector. If you subsequently
disable configuration ROM, FireInspector will once again report the minimal configuration
ROM.
To enable or disable configuration ROM:
Step 1
Select Setup > Configuration ROM from the menu bar.
The Set FireInspector's Configuration ROM dialog will appear.
Step 2 Click Enable Default Config ROM or Disable Config ROM.
The dialog will close.
You can force FireInspector to return the same configuration ROM as the device being
analyzed by using the Advanced option when enabling FireInspector's configuration ROM.
To select a custom configuration ROM for FireInspector:
Step 1
Select Setup > Configuration ROM from the menu bar.
The Set FireInspector's Configuration ROM dialog will appear.
Step 2
Click the Advanced... button.
The Open dialog will appear.
Step 3
Select a Config ROM (.rom) file to use and click Open.
Both dialogs will close.
Note: A configuration ROM file is a text file that contains one hexadecimal quadlet of data per line and does
not exceed one kilobyte in size. The quadlet in the file is returned by the analyzer when a request is
addressed to the ROM offset 0xFFFFF0000400, and successive quadlets are addressed sequentially.
Note: Resetting the analyzer will disable configuration ROM.