Teledyne LeCroy PeRT3 Phoenix System - Manual (Page 94)

92
Teledyne LeCroy Creating a New Test Pattern
Modifying Data Within a Pattern
The data pattern can be modified directly by double‐clicking on the data cell in the top
containing that value, then typing in the new value. If in Waveform, Binary (10), KD or
10bit (3FF) mode, the new value can be entered directly into the cell. If in SC or US mode,
the user can type the new K‐code or D‐code values directly into the cell, or use the drop‐
down menu to get a list of valid values.
Again, if the data is located within a frame, modifications may render the CRC invalid or
may corrupt the frame. This will be indicated by the frame summary in the bottom half of
the window.