Teledyne LeCroy PeRT3 Phoenix System - Manual (Page 22)

20
Teledyne LeCroy Introduction
Steps to Connect
On your host machine, launch the PeRT 3 software through one of the following methods:
 From the START Menu, select All Programs, then select LeCroy, then select PeRT
3
,
then select LeCroy PeRT 3 .
 Double‐click on the LeCroy PeRT
3
icon on your host machine desktop.
The PeRT
3
main application window displays. As shown below a green bar displays and
the cursor changes into a flying eagle (not shown) while the configuration is in
progress. The output window at the bottom of the screen will display ‘Verifying
Synchronization’ as shown below.
Once synchronized the output window will display the following.
The main application window displays.