Teledyne LeCroy PeRT3 Phoenix System - Manual (Page 53)

Teledyne LeCroy PeRT
3
Phoenix System User Manual 51
System Control Ribbon ‐ Main Tab Teledyne LeCroy
Figure 6.5: PCIe G3 Loopback
Figure 6.6: PCIe G3 Loopback EQ
Clicking Cancel will close the pop up window, Reset will reset all the values to their
default, and Save will apply the chose values to the initialization sequence.
For specific instructions on how to select the above settings, please refer to the Teledyne
LeCroy PCIE Gen3 Compliance test procedure.
The Count menu allows the user to choose between counting errors at the bit level (such
as is done for standard BER testing), or to count errors at the frame level (so that multiple
bit errors occurring within the same frame are counted as a single error).