Teledyne LeCroy PeRT3 Phoenix System User Manual

Page 93

Teledyne LeCroy PeRT

Phoenix System User Manual

Creating a New Test Pattern

Teledyne LeCroy

Figure 9.12: Import Data Dialog

Adding Data to Patterns

Data can be added to a pattern by clicking the Insert Data icon

in the Pattern Edit

or by using the Import Data

command in the Import/Export panel.

Clicking the Insert Data icon brings up the following dialog.

Figure 9.11: Insert Data Dialog

This dialog allows the user to enter a repeated value into the data, with the choice of
entering the data either before or after any symbol shown in the data stream.

Clicking the Import Data icon brings up the following dialog.

By clicking on the "..." button, the user can navigate the file system to locate the data file
to be imported, and then click the Import button to import the data.

Note that if data is entered outside of a frame, the frame remains intact and the data is
simply inserted into the stream between frames. If data is entered inside a frame, the
frame structure may be corrupted. This is often indicated to the user by highlighting the
CDB (H) field in red with the message “Frame data is incomplete.”