Teledyne LeCroy PeRT3 Phoenix System User Manual
Page 79
Teledyne LeCroy PeRT
3
Phoenix System User Manual
77
Test Script Data Block
Teledyne LeCroy
Basic Data
The Basic Data panel allows the user to name the test script and identify the creator of
the script by entering this information into the Script Name and Creator fields. The Script
Name will be the name listed in the Main Library window, under the Test Scripts tab,
whenever that window is displayed.
Figure 8.6: Basic Data Panel
Test Description
The Test Description panel allows the user to designated the Test Type (either Receiver
Test or Production Test) and number of channels to be tested (from 1 to the maximum
number supported by the system hardware). The channels tested will always start with
Channel 1 (e.g., if two channels are selected on a system that supports four channels, the
channels tested will be Channel 1 and Channel 2).
Figure 8.7: Test Description Panel
Device Description
The Device Description panel allows the user to specify the protocol to be used (options
are SATA, SAS, PCIe, USB 3.0, Custom, Generator Only or Receiver Only) and the
direction (DUT is Device, DUT is Host or Undefined).
Figure 8.8: Device Description Panel