Teledyne LeCroy PeRT3 Phoenix System - Manual (Page 15)

Teledyne LeCroy PeRT
3
Phoenix System User Manual 13
System Configurations Teledyne LeCroy
Upgrades and Maintenance
Maintenance agreements are available to provide extended support.
Note: PeRT
3
Phoenix systems require calibration on an annual basis to maintain performance within
factory specifications. The Teledyne LeCroy maintenance agreements normally include annual
calibration of the system.
Connection to Device Under Test
The PeRT
3
Phoenix provides coaxial SMA connectors to maintain signal integrity between
the device under test (DUT) and the test system. A separate SMA connector is provided
for each conductor in the differential pair (i.e., two connectors per line, four connectors
per bi‐directional channel). The nature of the connection to the DUT will vary depending
on the specifics of the DUT, but close attention must be paid to maintaining signal
integrity in design and implementation of the connections.