Teledyne LeCroy PeRT3 Phoenix System - Manual (Page 12)

Teledyne LeCroy Power
10
Standby Power
The Power (Standby) button controls the operational state of the
instrument. Press the button to switch the instrument On or into Standby mode
(Off).
Always use the Power button to execute a proper shut down process and preserve
settings before powering down.
Powering off does not disconnect the instrument from the AC power supply. The only
way to fully power down the instrument is to shut down then unplug the AC power cord
from the outlet. We recommend unplugging the instrument if it will be unused for a long
period of time.