Teledyne LeCroy PeRT3 Phoenix System User Manual

Page 20

Teledyne LeCroy

Introduction

5. The Welcome to the PeRT

Setup Wizard displays. Click Next to continue the

installation.

6. Follow the on‐screen installation instructions to complete installing the software. As

part of the software installation process, the USB drivers for the hardware will be
copied to the standard driver directory on your host machine.

7. When the software installation is complete, a message displays PeRT has been

successfully installed. Close the dialog box and connect the USB cable from the host
machine to the PeRT

Phoenix chassis.

8. Turn on the PeRT

system.

Note:

Do NOT let the operating system connect to the Internet to search for drivers.

Note:

Allow the operating system to automatically install the drivers.

Note:

If for some reason the operating system does not automatically find the drivers, you can

manually browse to C:\Program Files\LeCroy\PeRT3\drivers (or other directory if you did not
select the default directory on installation) and have the operating system install the drivers
from there.

9. Restart the host machine system.