Teledyne LeCroy PeRT3 Phoenix System - Manual (Page 18)

16
Teledyne LeCroy Introduction
Requirements for the Host Machine
A host machine system must be supplied to work with the Phoenix system with the
following minimum requirements:
 Intel Pentium 4, AMD Athlon/AMD Duron, or newer compatible processor with a
clock speed of at least 2 GHz.
 Microsoft Windows Vista or later OS.
 Minimum of 1 GB of RAM.
 Minimum of 25 MB of free hard disk space. Additional space is required for opera‐
tion of applications and storing recorded results.
 Display resolution of at least 1280 x 800 with 24‐bit color depth is highly recom‐
mended. Application can be run on 800 x 600 monitor, but user experience is much
better with the higher screen resolution.
 USB 2.0 port.
Front Panel Connections
Figure 3.1: Phoenix Front Panel
The front panel of the PeRT
3
Phoenix chassis has four pairs of SMA connectors, one pair
K‐type connector, power switch, LEDs and the USB Port for host machine connectivity.
Details of the front panel are explained in
“Connecting the Device Under Test” on
page 23 .