Windows setups, Guidelines for working in windows – Teledyne LeCroy WaveRunner XI SERIES Operator’s Manual User Manual
Page 85

O
PERATOR
’
S
M
ANUAL
3. Touch the Properties button, and then check the
File and Printer Sharing for Microsoft Networks
checkbox.
Windows Setups
If the instrument is to reside within a domain on your LAN, your IS administrator will have to connect the DSO.
G
UIDELINES FOR
W
ORKING IN
W
INDOWS
Although the instrument has an open architecture, avoid modifying the Windows operating system, since this may
cause problems for the instrument's user interface. Please follow these recommendations:
• Do not load any version of Windows not provided by LeCroy. If you load any Windows 2000 service packs
from Microsoft, please be advised that LeCroy cannot guarantee trouble-free operation afterwards.
• Avoid modifying Control Panel settings.
t) or screen size (800 x 600 pixel) settings.
m the CD shipped with the oscilloscope.
so may affect the readability of the dialogs.
Settings. Functionality of the
• Do not make any changes to the BIOS settings.
• Do not make any changes to the Windows power management system.
• Do not change the color resolution (24 bi
• After you load third-party software applications, if your oscilloscope does not work properly try reloading the
instrument software fro
• Do not modify or remove any system fonts; doing
• Do not change any display properties like Background, Appearance, Effects, or
oscilloscope or screen saver may be affected.
• Do not make any changes to the Windows folder.
WRXi-OM-E Rev C
85