Teledyne LeCroy WaveRunner XI SERIES Operator’s Manual - Manual (Page 105)

O
PERATOR
’
S
M
ANUAL
The inputs to Param Script can also be math (F1-Fx) or memory (M1-Mx) traces. The inputs to P Script can be
sarily Param Script. the results of any parameter measurement, not neces
Parameter Math Setup
1. Touch Measure in the menu bar, then Measure Setup... in the drop-down menu.
2. Touch the My Measure button in the alog.
3. Touch the Px tab for the parameter to which you want to apply parameter math.
4. In the Px dialog, touch the math on par rs button
Measure di
amete . The Source field will expand to two fields.
5. Touch inside the Source1 and Sour elds and select the parameters you want to apply math to (P1 to
Px). If you are applying math to a sin arameter (for example, invert), just touch inside the Source1 field
and select a parameter (P1 to Px).
6. Touch inside the Math Operator fiel elect a math operation from the Select Measurement menu. If
you select an operation that requires put parameters, the Source field will expand to two fields.
Parameter Script Math Setup
re in the menu bar, then Measure Setup... in the drop-down menu.
.
ce2 fi
gle p
d and s
two in
1. Touch Measu
2. Touch the My Measure button in the Measure dialog.
3. Touch the Px tab for the parameter to which you want to apply parameter math
4. In the Px dialog, touch the math on parameters button . The Source field will expand to two field
5. Touch inside the Source1 and Source2 field
s.
s and select the parameters you want to apply math to (P1 to
ath to a single parameter (for example, invert), just touch inside the Source1 field
1 to Px).
or field and select
Px). If you are applying m
and select a parameter (P
6. Touch inside the Math Operat P Script from the Select Measurement menu.
ipt Language field and select either VBScript or JScript from
8. Touch the Edit Code button; the Script Editor window opens. You can enter code in this window or call up an
existing script from a file storage location. If you create your script in this window, you can then export it and
save it to file.
7. In the Script Math dialog, touch inside the Scr
the pop-up menu.
WRXi-OM-E Rev C
105