Teledyne LeCroy WaveRunner XI SERIES Operator’s Manual - Manual (Page 162)

W
AVE
R
UNNER
X
I
S
ERIES
File
Choose File if you want to output the screen image to storage media such as floppy drive or hard drive. When
o use a preformatted disk.
, then Utilities Setup... in the drop-down menu.
en the File icon.
te background saves printer toner.
5 d type the path to the folder you want to print to, using the pop-up
rea and you only want to show the
outputting to floppy disk, be sure t
P RINTING T O A F ILE
1. In the menu bar touch Utilities
2. Touch the Hardcopy tab, th
3. Touch inside the File Format field and select a graphic file format from the pop-up menu.
4. Under Colors, touch the Use Print Colors checkbox if you want the traces printed on a white background. A
whi
. Touch inside the Directory field an
keyboard. Or touch the Browse button and navigate to the folder.
6. Touch inside the File Name field and enter a name for the display image, using the pop-up keyboard.
7. Touch the Grid Area Only checkbox if you do not need to print the dialog a
waveforms and grids.
8. Touch the Print Now button.
E-Mail
The instrument also gives you the option to e-mail your screen images, using either the MAPI or SMTP prot
Before you output to e-mail from the
Utilities dialog, you first have to set up the e-m
ocols.
ail server and recipient
address in Preference Setup.
S ENDING E- MAIL
1. In the menu bar touch Utilities, then Utilities Setup... in the drop-down menu.
2. Touch the Hardcopy tab, then the E-mail button.
3. Touch inside the File Format field and select a graphic file format from the pop-up menu.
4. Under Colors, touch the Use Print Colors checkbox if you want the traces printed on a white background. A
white background saves printer toner.
5. Touch the Prompt for message to send with mail checkbox if you want to include remarks with the image.
ly checkbox if you do not need to print the dialog area and you only want to show the
oice of manually setting the time and date or getting it from the Internet. If you
elect to get the time and date from the Internet, you need to have the oscilloscope connected to the Internet
through the LAN connector on the rear panel. You can also set time zones and daylight savings time.
6. Touch the Grid Area On
waveforms and grids.
7. Touch the Print Now button.
Aux Output
Refer to the Auxiliary Output Signals topic on page 45.
Setting the Date and Time
The instrument gives you the ch
162
WRXi-OM-E Rev C