Teledyne LeCroy WaveRunner XI SERIES Operator’s Manual User Manual

Page 190

AVE

UNNER

ERIES

190

WRXi-OM-E Rev C

tion script: explanatory notes

m script, but there are subtle differences.

value: you cannot use or see the extra two points. So

but only element zero is currently used. You must copy your parameter

the arrays of the Waveform Script, you cannot refer directly to elements of

not write something like

he same as the vertical unit of the trace, even if you have

e data, for example, unless you change the unit yourself.

r script, click here.

d your custom code here accessing OutResult and InResult objects

DemoScriptApr2.lss.

The default parameter func

The default parameter script is similar to the default wavefor

First, the size of the data array is the same as the nominal
"500 points" means just that: 500 points.

Second, the output looks like an array,
result into newValueArray(0). As with
the input and output arrays. You may

OutResult.ValueArray (0) = P.

Note that the unit of the parameter is displayed as t
squared th

To find out how to edit a paramete

The default parameter script is shown below

' TODO ad

' Here's a small example that just inverts the waveform

numParam = InResult.Samples

ReDim newValueArray(numParam)

scaledData = InResult.DataArray

For i = 0 To numParam-1

newValueArray(i) = -scaledData(i)_' Change this to do something useful.

OutResult.ValueArray = newValueArray 'only support raw data

Your parameter script should include something like this:

A. Do calculation to obtain your parameter value from the input data array.

B. newValueDataArray (0) = ParameterValue

C. OutResult.ValueArray = newValueArray

You can test this script using setup Mean

You can edit scripts using Notepad, but you will not get any notification of errors.

You are

not allowed to write OutResult.ValueArray(0) = MeanParameter.

InResult.DataArray and OutResult.DataArray are only to be used as shown in the default scripts and in the

dividual element in these arrays.

example scripts. You cannot refer to, or modify, any in