Sequence mode display, Persistence setup – Teledyne LeCroy WaveRunner XI SERIES Operator’s Manual User Manual

Page 72

AVE

UNNER

ERIES

WRXi-OM-E Rev C

3. Touch

inside

the

Grid Intensity field and enter a value from 0 to 100 using the pop-up keypad.

4. Touch

the

Grid on Top checkbox if you want to superimpose the grid over the waveform. Depen

grid intensity, some of your waveform may be hidden from view when the grid is placed on top. To undo,

ding on the

simply uncheck

Grid on Top.

5. Touch

the

Axis Labels checkbox to permanently display the values of the top and bottom grid lines

(calculated from volts/div) and the extreme left and right grid lines (calculated from the timebase).

6. Choose a line style for your trace: solid

Line or Points:

Sequence Mode Display

To a set up Sequence Mode display, you must first have selected

Sequence trigger mode in the Timebase

dialog. You must also have entered a

Num Segments value. Persistence must be turned off.

1. In the menu bar, touch

Display; then touch Display Setup… in the drop-down menu.

2. If persistence is enabled, turn it off by touching the

Persistence tab and un-checking the Persistence On

checkbox.

3. Select a display mode by touching one of the mode buttons.

4. Touch

inside

the

Num seg displayed field and enter a value, using the pop-up keypad. The maximum

number of segments that can be displayed is 100.

5. Touch

inside

the

Starting at field and enter a value.

Note: The maximum value that you can enter for Starting at depends on the Num Segments value you
entered in the Timebase dialog. It also depends on the

Num seg displayed value you entered here in the

Display dialog. For example, if you had entered a value of 500 in

Num Segments, and a value of 10 in Num

seg displayed, the maximum value you can enter as a starting segment is 491so that 10 segments can be
seen.

for a

r
c

" in

intensitie

me color, or graded in a spectrum of colors.

e for up to eight inputs for any channel, math function, or memory location (M1 to M4).

ersistence Setup

he analog Persistence feature helps you display your waveform and reveal its idiosyncrasies or anomalies

epetitive signal. Use Persistence to accumulate on-screen points from many acquisitions to see your signal

hange over time. The instrument persistence modes show the most frequent signal path "three-dimensionally

s of the sa

You can show persistenc