Teledyne LeCroy WaveRunner XI SERIES Operator’s Manual - Manual (Page 116)

W
AVE
R
UNNER
X
I
S
ERIES
Parameter Description
116
WRXi-OM-E Rev C
Definition Notes
Hist median Value of the "X" axis of a
histogram that divides the
population into two equal
halves. 2, Available with DDM2, JTA
and XMAP options.
Standard in DDA-5005A.
Hist minimum Value of the lowest (left-most)
populated bin in a histogram. th DDM2, JTA2,
rd in DDA-5005A.
Available wi
and XMAP options.
Standa
Hist rms ,
in DDA-5005A.
Root mean square of the
values in a histogram. Available with DDM2, JTA2
and XMAP options.
Standard
Hist sdev Standard deviation of values in
a histogram. Available with DDM2, JTA2,
and XMAP options.
Standard in DDA-5005A.
Hist top Value of the right-most of the
two most populated histogram
peaks. Available with DDM2, JTA2,
and XMAP options.
Standard in DDA-5005A.
Hold time
r.
Reference levels and edge-
transition polarity can be
selected. Hysteresis argument
used to discriminate levels
from noise in data.
Available with JTA2 and
XMAP options.
Time from the clock edge to the
data edge. You can set levels,
slope, and hysteresis
independently for Hold Clock
and Hold Data. See also Setup
paramete
Last Time from trigger to last
(rightmost) cursor. Ti
cu
e,
ed
me from trigger to last
rsor
Indicates location of right
cursor. Cursors are
interchangeable: for exampl
the right cursor may be mov
to the left of the left cursor and
first will give the location of the
cursor formerly on the left,
now on right.
Standard parameter.
Level@X
n two points,
it gives the interpolated value.
When the
Nearest point
checkbox is checked, it gives
Gives the vertical value at the
specified
x position. If the x
position is betwee
the vertical value of the nearest
data point.
Standard parameter.
Local base Value of the baseline for a local
feature. Hysteresis argument used to
discriminate levels from noise
in data.
Available with DDM2 option.
Standard in DDA-5005A.