IAI America PCON-SE - Manual (Page 156)

144
Change History
Appendix
Revision Date Description of Revision
Change History
2007.04
2007.06
2008.08
2009.12
2010.02
2010.03
2010.04
2010.09
2011.01
2011.04
2011.07
First edition
Second edition
Third edition
Fourth edition
Fifth edition
Fifth B edition
• Added “About CE Marking”.
Sixth edition
• Operation Manual Catalog No. changed
Seventh edition
• “Please Read Before Use” added after top page
• “H: High-acceleration loading specification” added to model name in P.6
Eighth edition
• “Precautions for Safety” in P.1 to 7, before Table of Contents, deleted
and swapped to “Safety Guide” after Table of Contents
• “List of Specifications of Applicable Actuators” in Appendix in P.113
swapped with “List of Specifications of Connectable Actuators”
• “Push Force and Current-limiting Value” added to Appendix in P.129
Ninth edition
• Skipped
Tenth edition
• Note added regarding CE Marking at the beginning
• Correction made to explanations of excited phase signal detection
time in P.55
• Cautions for push-motion operation added to P.64
• 0C8 error added in P.103
• Correction made to referable parameter numbers in caution note in
P.113 and 129
Eleventh edition
• Correction made in “Speed loop integral gain” in P.96
Twelfth edition
• Swapped over the page for CE Marking
Thirteenth edition
• Contents changed in 1.7 Warranty in P.18 to P.19
• Caution note added regarding positioning band setting in P.87 and P.102
• Contents changed and added in Appendix: List of Specifications of
Connectable Actuators.