Clear-Com CellCom Battery Pack Charger - Manual (Page 99)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
5 - 2 9
LOCKING FRONT-PANEL ENABLE BUTTONS
(“LOCK”)
When LOCK is selected a menu appears that allows the user to lock
the front-panel enable buttons for party-line channel A, party-line
channel B, and the wired program source.
Figure 5-66: Lock Enable Menu
Selecting ON for the lock maintains whatever state the buttons are in
when they are locked. That state is maintained even when the
basestation is turned off and re-started. The buttons can be locked
either in the enabled or disabled position, in any desired combination.
Selecting OFF allows the buttons to be toggled on and off with a single
push.
REMOTE MICROPHONE KILL (“RMK”)
When RMK is selected the remote microphone kill menu will be
displayed.
Figure 5-67: Remote MIC Kill Menu
Kill Beltpack Microphones (“KILL(BP”)
Selecting this function will kill the microphones on all the wireless
beltpacks connected to the basestation. Beltpack users will have to
press a talk key again to re-enable the beltpack microphone.
Kill Party Line Microphones (“KILL(PL)”)
Selecting this function will kill the microphones on all the party line
stations connected to the basestation. As this operates by interrupting
the power to the party line stations it does not kill microphones on party
line stations that are externally powered .i.e not powered from the
CellCom basestation.
Lock on Enable buttons is currently OFF
BACK OFF NO
Beltpack Remote MIC Kill
KILL(PL) BACK KILL(BP) KILL(ALL)