Clear-Com CellCom Battery Pack Charger - Manual (Page 61)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
4 - 1 3
Table 4-2: CellCom Basestation 4-Wire Pinout
CONNECTING TO CLEAR-COM MATRIX PLUS 3
The connection between a Matrix Plus 3 digital intercom port and a
CellCom 4-wire port is accomplished with a standard 4-pair
straight-through CAT-5 data cable with RJ-45 connectors on both
ends. In the current generation of CellCom, the audio input and audio
output pairs are all that will be used.
In the Matrix Plus 3 PGM-WIN configuration software, set the matrix
port that is connected to the CellCom basestation 4-wire port to
“4-Wire”. If the label of this CellCom 4-wire port is to be put onto more
than one intercom panel within the matrix system, and any and all
people who have activated a talk/listen to that port will be allowed to be
able to hear each other, as well as hearing the person talking to them
from the CellCom wireless beltpack, also check “Party-Line Enable” for
that 4-Wire connection in the configuration software.
Within the CellCom Basestation configuration software, the user can
adjust the input and output level for that port. Alternately, the input and
output levels can be adjusted on the CellCom basestation for the
particular 4-wire port, using the front-panel display. Repeat the
procedure for each CellCom 4-wire port that is connected with the
Matrix Plus system. Note that CellCom does not currently generate a
call signal to the Matrix port.
CONNECTING TO CLEAR-COM ECLIPSE DIGITAL
MATRIX
The procedure to connect between a CellCom 4-wire port and the
Eclipse digital matrix is similar to that of Matrix Plus 3. An identical
connection is made with 4-pair straight-through CAT-5 cable between
an Eclipse port and the CellCom port.
Within the Eclipse Configuration System software (ECS), set the port
to “Direct.” This will allow intercom panels in the Eclipse system to
converse with the CellCom basestation and beltpacks. Because there
Pin Description
1 Not used
2 Not used
3 Audio Output +
4 Audio Input +
5 Audio Input -
6 Audio Output -
7 Not used
8 Not used