Master volume, Menu level, Keytap mode – Clear-Com CellCom Battery Pack Charger User Manual
Page 164: Rssi warning, Page change
Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
1 0 - 1 2
Master Volume
Click on the down arrow to open a list of master volume level settings.
The available master volume level settings range from 0dB to -70dB.
The factory default is -10dB.
Menu Level
Click on the down arrow to display a list of menu level settings. These
settings control the menus that can be accessed by the beltpack user.
The settings are:
• Advanced - all beltpack menus are accessible to the user.
• Normal - the beltpack user cannot access the Microphone Type,
Headphone Limiter and Local Assignment menus.
• Basic - the beltpack user cannot access any menus except the
Contrast, Master Volume, Key Lock, Tap Latch, Page Lock and
information menus.
• None - the beltpack user has no access to the menus and cannot
change any beltpack settings.
The factory default is Advanced.
Page Change
Page change may be set to one of two values:
• Allowed - beltpack user can change page.
• Locked - beltpack user is restricted to preset page.
The factory default is Allowed.
Keytap Mode
Keytap mode (Tap Latch) determines whether the rotary push buttons
latch with one press or two presses when set in latching mode. Keytap
mode may be set to one of two values:
• Single Tap - rotary pushbutton latches after one press.
• Double Tap - rotary pushbutton latches are two presses.
The factory default is single tap.
RSSI Warning
The RSSI checkbox enables or disables the signal strength warning.
Click on the checkbox to enable signal strength warning. The factory
default is enabled (box checked).