Clear-Com CellCom Battery Pack Charger - Manual (Page 74)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
5 - 4
CHANGING BELTPACK LABELS
The first step in creating a CellCom system is to create individual
names (“labels”) for the wireless beltpacks and for the wired devices
connected to the basestation. Use individual labels for building
“point-to-point” communication routes.
To change a beltpack label
1. From the MAIN menu on the basestation’s front panel display, scroll
to and select BELTPACKS, as shown in Figure 5-4.
.
Figure 5-4: From the MAIN menu, select BELTPACKS
The AVAILABLE BELTPACKS menu appears, as shown in Figure
5-5. The first page shows the first five beltpack labels.
Figure 5-5: Available Beltpacks Menu
• The beltpacks’ generic labels BPK01 through BPK05 appear on
the upper row, while the labels given to the beltpacks appear just
under the generic labels. At first both upper and lower labels will
have the same generic designations.
• To get to the second, third and fourth pages, scroll all the way to
the right of the screen, and then continue to scroll. The second,
third and fourth pages will be displayed showing beltpacks 6 - 10,
11 - 15 and 16 - 20 (BPK06 - BPK10, BPK11 - BPK15, BPK16 -
BPK20).
2. Scroll to and select the desired beltpack label.
The next menu that appears gives the options for programming the
selected beltpack, as shown in Figure 5-6.
Figure 5-6: First Beltpack Programming Options Menu
3. Scroll all the way to the right of the screen and continue to scroll.
The second beltpack programming options menu will be displayed.
MAIN MENU
PORTS GROUPS SYSTEM BELTPACKS
AVAILABLE BELTPACKS
BPK02
BPK02 BPK03
BPK03 BPK04
BPK04 BPK05
BPK05 BPK01
BPK01
BACK
SELECTED BPK01 - BPK01
GROUPS LATCH BACK KEYS
Use individual labels for
point-to-point communication
routes.