Clear-Com CellCom Battery Pack Charger - Manual (Page 110)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
6 - 1 0
1,4,6 and 8 on the PC connector are shorted together, as with the PC
to CellCom cable.
REMOVING REGISTERED BELTPACKS FROM THE
BASESTATION
Beltpacks can be removed from the basestation and new ones
substituted with the CellCom Configuration Editor program. Refer to
the chapter “Cellcom Configuration Editor” for more information.
ACCESSING THE TALK/LISTEN PATHS ON
THE CELLCOM BELTPACK
The user can access up to six communications routes with a beltpack.
A route is activated by pressing the appropriate talk button (A or B)
when the desired label appears on the beltpack’s display.
• Page 1 of the beltpack’s display screen shows the assignments for
the Talk A and Talk B buttons (2 assignments).
• Page two shows the next set of assignments for the Talk A and
Talk B buttons (2 assignments).
• Page three shows the next set of assignments for the Talk A and
Talk B knobs (2 assignments).
Figure 6-7 shows how the front-panel screen on a beltpack displays
its six communications routes.