Beltpacks tab, Selecting the beltpack to register or edit, Beltpacks tab -7 – Clear-Com CellCom Battery Pack Charger User Manual
Page 159: Selecting the beltpack to register or edit -7
Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
1 0 - 7
BELTPACKS TAB
This tab allows the user to register beltpacks with the basestation, edit
key assignments and change input and output levels.
Figure 10-8: Beltpacks Tab
SELECTING THE BELTPACK TO REGISTER OR EDIT
Select which of the twenty available beltpack "slots" is to be edited
using the down arrow next to the beltpack name field. This will open a
drop-down menu containing all twenty beltpacks with serial numbers.
Figure 10-9: Beltpack List
Select the beltpack to be changed, then over-type the text in the
‘Name’ box (shown with a white background in the illustration below).
A maximum of five characters can be entered. Alternatively the
Next/Previous beltpack buttons between the ‘Name’ and ‘Serial Num’
fields can be used to step through the beltpacks to select the required
beltpack.