Clear-Com CellCom Battery Pack Charger - Manual (Page 134)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
7 - 1 8
• Press button C to set the keylock mode. If keylock is on a symbol will
be displayed on the main pages showing that the keys are locked. To
temporarily disengage keylock press and hold the scroll keys
simultaneously for 3 seconds. A short beep in the headphones will
signal that the keylock has been disengaged.
PTT CONFIGURATION
PTT configuration allows a PTT switch to be enabled or disabled.
Note: This feature is only available on PD2202 beltpacks.
• To configure PTT set to the Button options menu and use the scroll
keys to select PTT configuration.
• The PTT configuration menu will be displayed. Use the scroll buttons
to enable or disabled the PTT switch.
Use button C to set the PTT switch status.