Clear-Com CellCom Battery Pack Charger - Manual (Page 48)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
3 - 4
Antenna Light Display
These green LEDs, one for each of the ten antennas that the
basestation will support, light when an antenna is connected and
ready.
Display Screen
The display screen shows all of the menus and programming options
that are available within the CellCom system. The user can select a
particular beltpack and view all of its current talk/listen assignments, or
see all of the current members of a particular group. Via the screen
and rotary encoder, labels (5-character user names) can be created
and/or changed, new members assigned to groups, input and output
levels adjusted, and so on.
Setup/Enter Knob
The setup/enter knob is used to scroll through the various menu
options within the CellCom basestation, in order to discover specific
information regarding users or to program communications routes and
groups. Turning the knob clockwise scrolls display items toward the
right, and turning the knob counterclockwise scrolls display items
toward the left.
When a desired menu item is highlighted, pushing the setup/enter
knob inward will select that item. The lists of available beltpacks and
groups typically span two or more screens, so when the highlight is at
the leftmost or rightmost part of the screen and the user continues to
turn the rotary encoder in that direction, the display will jump to the
next screen selections (Example: in the beltpack sections, the first
screen shows beltpacks 1 through 5, and the second shows 6 through
10.)
Pressing and holding the Setup/Enter knob for more than three
seconds will return the display to the battery monitor.
Power Switch
The power switch will turn the CellCom basestation on and off.
9
10
11
12