Clear-Com CellCom Battery Pack Charger - Manual (Page 85)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
5 - 1 5
The AVAILABLE BELTPACKS screen is displayed (see Figure 5-5).
2. Select the beltpack for which audio levels are to be set. The
BELTPACK menu is displayed.
3. Select ‘LATCH’. The beltpack latching menu is displayed, as shown
in Figure 5-29.
Figure 5-29: Beltpack Latching Menu
4. Use the Setup/Enter knob to select ‘NON-LATCHING’ or
‘LATCHING’ on the menu and press the Setup/Enter knob to set the
latching status.
SETTING BELTPACK GROUPS
1. From the MAIN menu, select BELTPACKS.
The AVAILABLE BELTPACKS screen is displayed (see Figure 5-5).
2. Select the beltpack for which audio levels are to be set. The
BELTPACK menu is displayed.
3. Select ‘GROUPS’. The beltpack group editing menu is displayed, as
shown in Figure 5-29.
Figure 5-30: Beltpack Group Editing Menu
4. Use the Setup/Enter knob to scroll through the list of available
groups and press the Setup/Enter knob to select a group. More
than one group can be selected and each group that is selected will
be indicated by a border.
Figure 5-31: Beltpack Groups Selected
5. When all the required groups have been selected scroll to the
‘BACK’ item and press the Setup/Enter knob to return to the
beltpack menu.
BPK01 Is Currently Latching
BACK LATCHING NON-LATCHING
EDITING GROUPS FOR BPK01 - BPK01
GP#02
GRP01 GP#03
GRP02 GP#04
GRP03 GP#05
GRP04
BACK
GP#01
GRP01
EDITING GROUPS FOR BPK01 - BPK01
GP#02
GRP01 GP#03
GRP02 GP#04
GRP03 GP#05
GRP04
BACK
GP#01
GRP01