Clear-Com CellCom Battery Pack Charger - Manual (Page 144)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
8 - 8
CONNECTING AN ANTENNA SPLITTER TO THE
CELLCOM BASESTATION AND TO TRANS-
CEIVER/ANTENNAS
After the connections have been made between the splitter and the
transceiver/antennas, make sure that the data LED’s are lit at the
individual ports on the antenna splitter. Also make sure that the both
the green power LED and the yellow data LED are lit on each CEL-TA
transceiver/antenna. If all are properly lit, then the connection has
been successfully made and the coverage zones will be active and will
support beltpacks. If the transceiver antennas are not lit, check the
connections.