Clear-Com CellCom Battery Pack Charger - Manual (Page 131)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
7 - 1 5
ADJUST CONTRAST
• Select the Adjust Contrast option from the main programming menu
and press button C to display the contrast setup.
• The contrast adjustment slider is displayed.
• Use the scroll buttons to adjust the contrast level and press button C
to set the contrast and exit to the previous menu.
SET FACTORY DEFAULTS
To reset the beltpack to the factory defaults go to the main
programming menu and select Set Factory Defaults.
• The factory defaults options are NO to cancel the operation or YES to
default all the user settable parameters such as limiters and levels to
the factory settings.
• Select NO to cancel or use the scroll buttons to select YES to reset.
.
• When the beltpack is reset to factory defaults and confirmation
message is displayed.