Clear-Com CellCom Battery Pack Charger - Manual (Page 88)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
5 - 1 8
2. Select the port for which the audio levels are to be adjusted from the
AVAILABLE AUDIO PORTS menu. The SELECTED PORT menu
will be displayed.
Figure 5-36: Selected Port Menu for Level Setting
3. Select ‘LEVELS’ from the next menu.
The EDITING LEVELS menu appears.
Figure 5-37: Port Levels Menu
4. Select either ‘INPUT’ to display the input level setup menu.
Figure 5-38: Port Input Level Setup
5. Rotate the setup/enter knob clockwise or counterclockwise to
increase or decrease the input level in 1 dB increments.
6. When the desired audio level appears on the screen, press and
release the setup/enter knob to select it,
7. The changes are saved and applied automatically five seconds after
the last time the setup/enter knob was pressed or turned. The
front-panel display flashes to indicate that the changes are being
saved and applied.
8. Select either ‘OUTPUT’ to display the output level setup menu.
Figure 5-39: Port Output Level Setup
9. Rotate the setup/enter knob clockwise or counterclockwise to
increase or decrease the output level in 1 dB increments.
10. When the desired audio level appears on the screen, press and
release the setup/enter knob to select it.
SELECTED HDSTA - HDSTA
KEY BACK
GROUPS
LEVELS LABEL
Editing levels for HDSTA - HDSTA (in dB)
INPUT
0 OUTPUT
0
BACK
Input level for HDSTA - HDSTA (dB)
0
Output level for HDSTA - HDSTA (dB)
0