Clear-Com CellCom Battery Pack Charger User Manual
Page 188
Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
1 1 - 8
Figure 11-8: Select Firmware File
Select the file, then press “Open”. The main application dialog box will
now show the date of the new file, as below.
Figure 11-9: Firmware Download
Press “Download” to start the download process. If the program
communicates successfully with the basestation, the progress bar will
start to advance. Diagnostic messages indicating that a download is in
progress will also appear on the basestation front panel display.
Download of the file should take around fifty minutes to an hour to
complete.
If the program fails to communicate with the basestation, after a few
seconds an error dialog will be displayed:
This manual is related to the following products: