Clear-Com CellCom Battery Pack Charger - Manual (Page 181)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
1 1 - 1
CELLCOM TOOLKIT
INTRODUCTION
The Cellcom Toolkit is a suite of PC programs running under Windows
2000 or later, designed to allow the user to set up, backup, and
upgrade the Cellcom basestation and run diagnostics on the
basestation.
The distribution CD also includes a separate toolkit for upgrading the
firmware on beltpacks and antennas.
CONFIGURATION EDITOR
The Configuration Editor is used to register beltpacks, create and back
up basestation configurations, download new configurations to
basestations and back up and restore basestation configurations made
from the basestation front panel.
The Configuration Editor also upgrades the basestation firmware when
a new version is released via the Ethernet port.
BELTPACK AND ANTENNA SERIAL FIRMWARE
UPGRADER
The beltpack and antenna serial firmware upgrade is used to upgrade
the beltpack and antenna firmware when a new version is released via
the Serial cable.
DIAGNOSTIC PROGRAM
The diagnostic program connects to the basestation via a serial link
and may be used to investigate problems with the system.
TOOLKIT INSTALLATION
To install the CellCom toolkit follow the link on the installation/upgrade
CD and click on the installation executable “CellCom FreeSpeak V2.0
Toolkit 710838.exe”. If a CellCom toolkit is already installed on the
system the CellCom toolkit installer will remove it before installing the
V2.0 toolkit.
The CellCom toolkit contains the Basestation Configuration Editor,
Basestation Configuration Editor help, the CellCom diagnostics
program, Basestation Serial Upgrader and Beltpack/Antenna Serial
Upgrader.
11