Clear-Com CellCom Battery Pack Charger - Manual (Page 165)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
1 0 - 1 3
Low Battery Warning
The Low Battery Warning checkbox enables or disables the battery
warning. Click on the checkbox to enable low battery warning warning.
The factory default is enabled (box checked).
Keylock
The Keylock checkbox enables or disables the deactivation of the
beltpack scroll buttons after three seconds of inactivity. Click on the
checkbox to enable keylock. The factory default is disabled (box
unchecked).
Call Alert
The call alert checkbox enables or disables the call alert facility which
uses the vibrate mode to signal the beltpack user that there is an
incoming call. Click on the checkbox to enable call alert. The factory
default is disabled (box unchecked).
ASSIGNING BELTPACK KEYS
The program can be used to assign the destinations of each of up to
the six (three pages of two) soft assignments of the beltpack talk keys.
The number of pages available on each beltpack for configuration can
be set using the ‘Pages’ parameter. Click on the down arrow beside
the page count to display the options for the number of pages the
current beltpack can use.
Figure 10-15: Beltpack Page Number
Select the required number of pages for the beltpack and the key valid
key assignments are enabled for editing.