Clear-Com CellCom Battery Pack Charger - Manual (Page 208)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
A - 2
You may then edit these values as desired and then click "WRITE
BELTPACK SETTINGS" to write these parameters back to the
DEFAULT and USER settings in the beltpack. The new settings are
immediately applied to the beltpack.
From the beltpack you may then edit the USER settings only.
From the beltpack you may, if you so choose, select the "Set Defaults"
menu option. The will COPY the DEFAULT settings to the user USER
settings.
From the beltpack you cannot edit DEFAULT settings.
Config Editor does not read back the USER settings.
On the config editor the factory default settings are available by
clicking on the "Recall Factory Defaults" button. You may then write
these settings to the beltpack.