Clear-Com CellCom Battery Pack Charger - Manual (Page 95)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
5 - 2 5
front-panel display flashes to indicate that the changes are being
saved and applied.
10. Select the ‘LoNULL’ item to display the output level setup menu.
Figure 5-57: Party Line LoNULL Level
11. Rotate the setup/enter knob clockwise or counterclockwise to
increase or decrease the nulling level in increments of 1 between 0
and 127.
12. When the desired audio level appears on the screen, press and
release the setup/enter knob to select it,
13. The changes are saved and applied automatically five seconds
after the last time the setup/enter knob was pressed or turned. The
front-panel display flashes to indicate that the changes are being
saved and applied.
14. Select the ‘HiNULL’ item to display the output level setup menu.
Figure 5-58: Party Line HiNULL Level
15. Rotate the setup/enter knob clockwise or counterclockwise to
increase or decrease the nulling level in increments of 1 between 0
and 127.
16. When the desired audio level appears on the screen, press and
release the setup/enter knob to select it.
17. The changes are saved and applied automatically five seconds
after the last time the setup/enter knob was pressed or turned. The
front-panel display flashes to indicate that the changes are being
saved and applied.
LH Nulling level for PLCHA - PLCHA (dB)
0
RH Nulling level for PLCHA - PLCHA (dB)
0