Clear-Com CellCom Battery Pack Charger - Manual (Page 121)

Clear-Com Communication Systems
CellCom V2.0.3 Instruction Manual
7 - 5
Low Battery Alarm Threshold
Selecting this option and pressing button C will select the low battery
threshold at which the low battery alarm will activate.
Low Battery Threshold Setup
Moving the slider with the left and right scroll buttons allows the low
battery alarm threshold to be set. When the battery level reaches the
threshold set the low battery alarm will activate. Press button C to
confirm the setting and exit back to the low battery menu.
When the low battery alarm is set use the scroll buttons to select the
Exit symbol and press button C.
SWITCHING THE LOW SIGNAL STRENGTH ALARM
ON AND OFF
Select the transmitted signal icon from the above menu and press
Pushbutton C. This calls up menu on which the user can select low
signal alarm On or Off.
.
When the low signal alarm is set use the scroll buttons to select the
Exit symbol and press button C.
THE VIBRA CALL ALERT MENU
This is the menu for determining whether the low battery and/or low
signal strength warnings should use the vibrate function (type II
beltpacks only) and/or an audio beep function.
This menu is reached by selecting the Alarm option on the main
programming menu then selecting the Vibrate/audio option. The alert