Burkert Type 8620 - Manual (Page 52)

mxCONTROL Type 8620
Page 52
Configuration Access
via Cfg.-
menu Access
via XML-
Cfg.-File Abbrevia-
tion
(menu) Value range Default values
(after factory reset or
at start of Cfg-File-
Download)
Notification
Notification via email
rw rw Via email Yes, No No
SMTP mail server (#) (***)
IP address of mail server
rw rw IP 0.0.0.0 …
255.255.255.255 0.0.0.0
Port number for SMTP rw rw Port 0 … 65535 25
Email (***)
Device´s sender address
(#)
rw rw From
(sender)
max. 47 characters
(***** *)
[[email protected]]
Recipient 1 rw rw To (reci-
pient 1) max. 39 characters
[[email protected]]
Recipient 2 rw rw To (reci-
pient 2) max. 39 characters
[[email protected]]
Email 1, Email 2, Email 3 (***)
Email Trigger
rw rw Trigger On, Off On
Email priority (for display in
email program on PC) rw rw Priority 1 (highest) …
5 (lowest) 1
Renotification interval (****) rw rw ReNotify 0 (off) … 10800 min 0 min
Email subject rw rw Subject max. 23 characters
[a-zA-Z0-9 _.:/!+*-] Email
1: Alarm
2: Warning/Error
3: Device Restarted
(#) Ask your local network administrator for the right settings.
(*) Only visible, if Static IP = Yes
(**) Only visible, if Static IP = No
(***) Only visible, if Via email = Yes
(****) Only available for email 1 and email 2
(*****) ID = Device ident no. (8 digits with ledig zeros),
SERIAL = Device serial no. (7 digits with ledig zeros)
(***** *) Empty string activates default sender address: 8620_ID_SERIAL with (*****)
11.5.3 (Remote) Device access via PC-Tool
Remote device access allows operating the controller via Ethernet (devices with Ethernet option only)
or via USB.
Remote device access can be disabled only directly at the device – in the configuration menu:
USB: Configuration \ Communication \ USB \ PCToolAccess On (default) / Off
Ethernet: Configuration \ Communication \ Ethernet \ PCToolAccess On (default) / Off
Configuration of PCToolAccess is not stored in the configuration file.
The PCToolAccess has to be disabled manually again in case of factory reset.
The device can handle only one remote device access at one time.