Burkert Type 8620 - Manual (Page 130)

mxCONTROL Type 8620
Page 130
Parameter (CodeLevel: Operator)
Parameter Abbrevia-
tion
(menu) Value range Default values
(after successful download of
Cfg-File)
Unit of Batch Size SP BSi
unit L, hL, m3,
Gal US, bbl US, gal Imp, ft3,
yd3, Pulse*) L
Batch Size (target) SP BSi 0.1 … 9999.0 100
Dose Time Tdose 1 … 10800 s 120 s
Dosing start delay Tdelay 0 … 10800 s 0 s
Module output during
dosing CMD on 0 … 100 %
0 %, 100 % (if On/Off Output) 100 %
*) The unit „Pulse“ will be only accepted, if the unit pulses per “Pulse” is selected at “Unit K-Factor” at the
dedicated input; other units are only accepted, if not the unit pulses per “Pulse” is selected at “Unit K-Factor”
Configuration (CodeLevel: Specialist)
Configuration Access
via Cfg.-
menu Access
via XML-
Cfg.-File Abbrevia-
tion
(menu) Value range Default values
(after factory reset or
at start of Cfg-File-
Download)
Module active/not active rw rw Module On/Off Off
System switch override rw rw SSOR Yes / No No
Flow switch override rw rw FSOR Yes / No No