Burkert Type 8620 - Manual (Page 10)

mxCONTROL Type 8620
Page 10
4 General Information
4.1 Scope of Delivery
Verify immediately after receiving the shipment that the contents are not damaged and agrees with the
specified scope of delivery as stated on the enclosed "Delivery instructions"; also make sure that the
details on the type plate match the conditions of use.
Please contact our sales centre immediately in case of disagreements:
Bürkert Fluid Control Systems
Sales Center
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Germany
Phone: +49 (0)7940 - 10 111
Fax:
+49 (0)7940 - 10 448
Email: [email protected]
or your Bürkert distribution centre.
4.2 Warranty Regulations
This document contains no promise of guarantee. Please refer to our terms of sales and delivery. The
warranty is only valid if the device is used as authorized in accordance with the specified application
conditions.
The warranty extends only to defects of the „Type 8620 mxCONTROL“ and its components.
We accept no liability for any kind of collateral damage which can occur due to failure or
malfunction of the device.
4.3 Certifications
The certification designation on the Bürkert type plates refers to the Bürkert products.
More information on the certifications can be found in the chapter 6.1 “Technical Specifications“.
4.4 Information in the Internet
You can find operating instructions and data sheets on type 8620 in the Internet at:
www.buerkert.de → Technical Data → Operating instructions → Data sheets → Type 8620.
The complete documentation is supplied on the SD card.