Atec Agilent-8563E - Manual (Page 48)

ESG Family Signal Generators Service Software
Running the Service Support Software
Calibration Guide 3-27
Restart Rerun a test that was running when the testing was stopped. This restarts
the test from the beginning.
Next Test Quit running the current test and give it a Fail status. Then, continue
testing with the next test.
Rerun Restart the testing at the beginning of the first test.
Abort Quit testing. Abort all tests.
Printing the Test and Adjustment Results
Once the tests are complete, a dialog box is displayed that asks if you want to print the log
file.
The log file is the file in which the test (or adjustment) results are stored. Select the Yes
button to print the test results using the printer connected to LPT1. Choosing the No
button allows you to exit the program without printing the test results.
There are two other methods of printing the test results.
The first method is selecting the Print Log File selection from the File drop-down menu.
The software asked you to define the computer path and file name when the tests were
performed. The default directory is the “log” subdirectory of the destination directory
where you installed the software. (C:\HP_SVC\EGS_B\ was the default destination
directory.)
The second alternative method of printing is opening the file in a text editor and printing
the file in the text editor.
Exiting the Software
Exit the software by selecting Exit from the file drop-down menu.
Pressing Alt-F4 on the keyboard is an alternate method of exiting the software.