Atec AWT-PIM-S1P Series - Manual

PIM S1P - Portable PIM Analyzer
ƒ Multiple Test Modes: Field Diagnostic, Analyzer with Multi PIM, PIM over
Time, Rx Sweep, Single Carrier Mode for System Return Loss measurements,
Distance to PIM, VSWR, Distance to Fault.
ƒ Embedded DTP. No need to re-connect DUT when switching between PIM
and DTP measurements.
ƒ Variable output power 15 dBm to 44 dBm. Ideal for Macro BTS and DAS.
ƒ Very high PIM sensitivity: -172 dBc @ 2x 43 dBm carriers.
ƒ PIM vs. Time graph, Min & Maxhold feature. Perfect for static & dynamic PIM
measurements.
RF & Microwave
Technology
AWT-Global provides ad-
vanced telecommunication
technology products and
analyzers for a variety of RF
and Microwave applications.
Portable PIM Test Systems
Field use demands rugge-
dized yet accurate test in-
struments. Our portable PIM
testers are designed exactly
for these conditions. The
wide Tx power range from
15dBm to 44dBm makes the
PIM S1P analyzer ideal for
Macro BTS sites and DAS
installations. DTF (opt) can
be measured with the push
of a button.
PIM Analyzers for
Production
Production analyzers have
to perform permanently.
AWT - Global offers single
and dual band PIM analyz-
ers that are build for 24/7
operation. Also available are
expandable systems for up
to four frequency bands.
AWT portable PIM S1P analyzers are powerful tools for analyzing telecommunication infrastructure.
These PIM testers provide constant CW Power and with that, are in full conformance to PIM standard
IEC 62037. The ruggedized analyzers are built to work under tough conditions and will perform reli-
ably. PIM S1P testers offer variable output power from 15 dBm to 44 dBm The market leading dynamic
range and low receiver noise level makes them ideal for pinpointing and eliminating PIM at macro BTS
sites and in-building DAS installations. Measurement results can be stored as PDF document, BMP
screen shots, PDF protocol with embedded screen shot or as alphanumerical CSV files. Distance-to-
PIM (DTP) measurements are accurate due to a patented technology. DTP is performed conveniently
with the push of a button, no need to install external hardware and to re-connect the DUT.
Model Description Tx Range (MHz) Rx Range (MHz)
PP700L LTE700 (low) 728 ~ 759 698 ~ 716
PP700U LTE700 (high) 730 ~ 759 776 ~ 788
PP800 LTE800 791 ~ 821 832~ 862
PP850 AMPS/CDMA 869 ~ 896 824 ~ 851
PP900 GSM900 935 ~ 960 890 ~ 915
PP900E E-GSM & GSM900 925 ~ 960 880 ~ 915
PP1800 DCS 1800 /GSM1800 1805 ~ 1880 1710 ~ 1785
PP1900 PCS1900 1930 ~ 1990 1850 ~ 1910
PP2000TD TD-SCDMA(2000) 2010 ~ 2025 1900 ~ 1920
PP2100UMTS UMTS/W-CDMA 2110 ~ 2170 1920 ~ 1980 / 2060
PP2100AWS AWS 2110 ~ 2155 1710 ~ 1755
PP1921PA PCS & AWS 1930 ~ 1990 / 2110 ~ 2155 1710 ~ 1755
PP2160JP W-CDMA-JP 2150 ~ 2170 2110 ~ 2140
PPWBKR WiBro-KR 2110 ~ 2170 / 2300 ~ 2390 1910 ~ 1990
PP2600LTE IMT-E(2600), LTE2600 2620 ~ 2690 2500 ~ 2570
Models