Required test equipment – Atec Agilent-8563E User Manual

Page 23

Text mode
Original mode

Service Software

ESG Family Signal Generators

Required Test Equipment

3-2

Calibration Guide

Required Test Equipment

The following equipment is required to run the software:

• Personal computer with the following specifications:

• 386/33 MHz CPU, or better

• 8 Mbytes of RAM

• Hard drive with at least 350 Mbytes free

• 16-color VGA monitor

• 3.5-inch disk drive

• MS Windows 3.x, MS Windows 95, or MS Windows NT.

• 2 Button Mouse (optional)

• Printer, MS Windows-supported (for test results documentation)

• HP 82341C/D GPIB Interface Card

• HP SICL Libraries must be installed and configured.

NOTE

No other MS Windows programs may be running during installation. Close
any MS Windows programs that are currently running prior to starting the
installation.