Atec Agilent-8563E - Manual (Page 147)

ESG Family Signal Generators Safety and Regulatory
Instrument Markings
Calibration Guide 7-3
Instrument Markings
The following markings and caution and warning labels are used on the instrument. Be
sure to observe all cautions and warnings.
WARNING No user serviceable parts inside. Refer servicing to qualified
personnel.
The instruction manual symbol. The product is
marked with this symbol when it is necessary for the
user to refer to the instructions in the manual.
The CE mark is a registered trademark of the
European Community (if accompanied by a year, it is
the year when the design was proven).
The CSA mark is the Canadian Standards Association
safety mark.
The C-Tick Mark is a trademark registered to the
Australian Communications Authority and indicates
compliance with the standard which limits
electromagnetic radiation from computing hardware.
This symbol is used to mark the on position of the
power line switch.
This symbol is used to mark the standby position of
the power line switch.
This symbol indicates that the input power required is
AC.
ISM 1-A This is a symbol of an Industrial Scientific and
Medical Group 1 Class A product. (CISPER 11, Clause
4)